top of page
Carbine and Rope_edited_edited.jpg

COURSES

SPRAT Rope Access, Levels 1,2,3 Certifications:

4 person minimum required for course to take place, call to close a class, 8 person maximum. *All classes after May 12th no longer include lunch or SPRAT evaluation third party fee of $100. $1650 per student + third party evaluation fee.

Rope Access Fundamentals:

$1250 per student

This course is a 3-day program for building maintenance/window cleaning operations that introduces the basics of rope work to demonstrate safe working methods for workers starting out in the rope descent industry.

 

Training Key Topics:

  • Ascent and Descent in RAD (Rapid Ascent/Descent descender based) method

  • Fall Protection Authorized User (Not CP level)

  • Basic Knots

  • Edge Negotiation and canopy transitions

  • Load Sharing Anchors and sling load angles

  • KAA/Jag based pickoff on adjacent set

  • Rope to Rope Transfer

  • General Rooftop Safety Awareness and Anchor Layout interpretation

  • Building Façade Architectural features and protection

  • Rope Chafe Protection

  • Extension and Stepladder safety, stabilization, and positioning when used as a work

  • platform

  • Horizontal Lifeline Basics

  • Equipment Inspection (Pre-Use)

 

Must be 18 years or older to qualify for training.

This training is not affiliated with SPRAT, IRATA, OSHA, or IWCA.

First Aid CPR/Advanced First Aid:

Please call for details and/or to schedule this course.

SPRAT Work-At-Height:

4 person minimum, 8 person maximum. $1100 per student

This intensive 2.5 day (16 hour training and approximately 4 hour third party Evaluation) course follows the curriculum set forth in the SPRAT documents (see SPRAT.org). Students will gain solid qualifications in understanding the physics of falling, calculating clearance and force criteria, and performing advanced transitions between a variety of Fall Arrest and Restraint Systems. On the third day, students will receive independent evaluation and upon successful passing, documented Certificate from the SPRAT organization. This is a performance based, hands-on demonstration course with numerous techniques and mock setups provided. No prior experience necessary. 

Fall Protection Competent Person (OSHA):

4 person minimum, 10 person maximum. $750 per student

This 2-day (16 hour) training class includes the fundamentals required for an OSHA designated employee:

​

  • Fall Hazard recognition, elimination, controls, and hierarchy

  • Applicable regulations and definitions

  • Fall Hazard Surveys and Fall Protection Procedures

  • Responsibilities of Designated Persons

  • Detailed Inspection of Equipment, Components, and Subsystems

  • Determination of Unsafe Systems

  • Fall Protection Rescue Considerations & Hands-On Mockups

  • Selection and Use of Non-Certified Anchorages

 

 

Upon successful completion of coursework and written test, candidates will receive a laminated certificate wallet card and PDF certificate. The class is held at our Arlington, WA training facility, and equipment will be provided for use during the class. This is a hands-on demonstration course with numerous techniques and mock setups provided. No prior experience necessary. 

Advanced Rescue:

4 person minimum, 10 person maximum. $1500 per student

This 3-day onsite course is tailored to fit specific Fall Protection needs while covering a wide variety of skills. We’ll cover rescuing from the same rope, tower rescue, rescuing over edges, powered ascent rescue, confined spaces rescue, tensioned line and haul rescue, and many more. We can also work with your company to see what works best for your needs! Price includes gear rental and instructor.

Powered Personnel Ascenders:

4 person minimum, 10 person maximum. $450 per student

This 4-hour training class is intended to familiarize technicians with the safe use of a variety of powered ascenders on the market. These ascenders have revolutionized suspended access and are a great addition to the kit when operated with knowledge of their proper uses, limitations, and benefits.​

 

Prospective students should have prior training in Industrial Rope Access, Rope Descent Systems, and/or Fall Protection System Use. The class is held at our Arlington, WA training facility, and equipment will be provided for use during the class.

Suspended Scaffold Competent Person, Introduction to Rigging Principles:

2 person minimum, 6 person maximum. $1100 per student

This 2-day (16 hour) coursework provides valuable training for operations that utilize one and two point suspended scaffolds in an industrial setting. Concepts covered include:

​

  • Regulatory overview and applicable safety standards

  • Hoist and Platform Subassembly Daily Inspections

  • Overspeed and Emergency Descent Control Provisions

  • Wire rope rigging safe practices, rigging accessories

  • Tilt Up Davit Procedures

  • Fall Protection Considerations

  • Ground Rigged vs Roof Rigged Operations

  • Counterweighted Outrigger Use and Calculation

  • Parapet Clamps

  • Safety Factor Calculation

  • Angulated Roping and Tiebacks

  • Basic Self-Rescue

 

 

The class is held at our Arlington, WA training facility, and equipment will be provided for use during the class.  Prior Fall Protection training encouraged.

Rope Access Program Administrator:

2 person minimum, 10 person maximum. $1200 per student

This one-day course is designed to quickly equip you with the essential knowledge and skills for effective Rope Access team management. Topics include developing an access work plan, Job Hazard Analysis (JHA), and Fall Protection Plans (FPP), as well as understanding roles and responsibilities, fostering a strong safety culture, and identifying and mitigating hazards. For a more tailored training experience, this course can be paired with our other courses such as Powered Ascender Training or Competent Person Training. Price includes instructor.

Authorized Fall Protection User:

4 person minimum, 10 person maximum. $350 per student

The objective of this one-day training is to understand the equipment encountered on the jobsite. Proper training with everyday tools helps us remain safe and efficient. We will cover gear, fall arrest systems, standards and laws, harnesses, inspection, rescue considerations, and more!

Tree Climber Primer:

4 person minimum, 10 person maximum. Call for price!

This two-day course is everything one needs to get started in the world of tree climbing! Focused on the core principals this introductory program teaches you the fundamentals of a safe work environment and the gear involved.

Mobile Training Opportunities:

5 person minimum, 10 person maximum. Please call for quote

$250 mobilization fee associated with any off-site work. Meals are not provided. Gear rental and instructor fees may apply.

Custom Training Opportunities:

We offer a wide range of courses and can tailor training to fit your needs, including specialized Fall Protection/Rescue courses beyond those listed on our website.

Open Gym Days:

Held every third or fourth Saturday of the month, please contact for next available date. $40/person.

Recreational Climbing and Caving Ropework and Self-Rescue

Single Rope (SRT) and Double Rope (DRT) Principles

Knots and Hitches for Industry and Recreation

bottom of page